ALLEN & HEATH 1D Manuel d'utilisateur télécharger pdf (Page 13)

Allen & Heath 13 XONE:1D User Guide

D1 B- 1 G# - 1 A# 0

C# -1

A-2

A# -2

B-2

CC3 7

CC3 6

JOG SELECT

MIDI CHANNEL NUMBER AND MAP

MIDI Channel Number

The MIDI channel number will default to channel 16, but can be

changed to any channel between 1 and 16.

To change the MIDI channel number and MIDI map:

1. Connect the USB cable to the PC/Mac but not the Xone:1D

2. Hold down the switch on the encoder shown in the diagram

3. Connect the USB cable to the Xone:1D

4. The illuminated switches will flash three times—now release

the switch on the encoder

The illuminated switches on the Xone:1D will display the current

MIDI channel number in binary format as shown below.

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Channel 8

Channel 9

Channel 10

Channel 11

Channel 12

Channel 13

Channel 14

Channel 15

Channel 16

To change the channel number that the MIDI is transmitted on, rotate the encoder above

the jog wheel.

Once the desired channel has been selected, press and then release the switch on the

encoder above the jog wheel, the illuminated switches will flash once indicating that the

channel number has been set.

1 2 ... 8 9 10 11 12 13 14

Pas de commentaire

ALLEN & HEATH 1D Manuel d'utilisateur Page 13