ALLEN & HEATH XONE V6 Guide de l'utilisateur télécharger pdf (Page 18)

18 XONE:V6 User Guide

Cue, Ground and Headphones Connectors

External cue input TRS jack break point for overriding the cue system

with an external audio signal. The input is unbalanced with tip = left, ring =

right and sleeve = common ground.

Cue DC link 9-pin D connector for linking the console cue logic system

with external Allen & Heath accessories.

Chassis ground Two heavy duty binding posts are provided for ground

wire connection. Use these to bond the turntables and other equipment

chassis to the console chassis ground.

For safety it is important that all equipment grounds are connected

to mains ground so that exposed metal parts are prevented from carrying

high voltage which can injure or even kill the operator. It is recommended

that the system engineer check the continuity of the safety ground from all

points in the system including microphone bodies, turntable chassis,

equipment cases, and so on.

Headphones Two headphones sockets are provided, one on the front

panel, the other on the rear. This provides the choice as to where to plug in the

DJ headphones.

CUE DC LINK

EXT CUE INPUT

PHONES 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 41 42

Pas de commentaire

ALLEN & HEATH XONE V6 Guide de l'utilisateur Page 18